xx性欧美熟妇精品久久久久久久 ,www久久久com,国产jizzjizz18精品

品牌	HF Scientific/美國

Catalog #	Description
28034	CLX-Ex2 TRO and Chlorine Monitor for hazardous environments
28033	The CLX-XT2 Extended Reagent Life Online TRO and Chlorine Monitor
OZ31B	Dissolved Ozone sensor head - PEEK, Flat Use with the AdvantEDGE LD500 Analyzer or the AquaSelect Multi-Input Analyzer
40071	MicroTOL 6 instrument, Infrared, range 0.02-10 NTU with ultrasonic autoclean
40070	MicroTOL 6 instrument, white light, range 0.02-10 NTU with ultrasonic autoclean
40061	MicroTOL 5 instrument, Infrared, range 0.02-10 NTU
40060	MicroTOL 5 instrument, white light, range 0.02-10 NTU
10487	Nitrification Inhibitor Dispenser
AP0BASAC	AquaSelect Multi-Input Process Analyzer
28031	CLX-Ex Residual Chlorine Monitor for Hazardous Environments 240 VAC for Total chlorine - complete with operator's manual. Reagents must be purchased separay.
28030	CLX-XT Extended Reagent Life Chlorine Monitor - for Total Chlorine complete with operator's manual. Reagents must be purchased separay.
AEC1C0B	AEC Panel system, integral LD500 with 2 outputs, 2 relays, flow chamber, automatic pH 100/240VAC
AEC1A0A	AEC Panel system, integral LD500 with 1 output, flow chamber, manual pH 24VDC
28336	ProCheck-S mid NTU value (typically around 7 NTU) - for MicroTOL, Micro100/1000 - includes one ProCheck-S standard, log sheet, microfiber cloth, instruction sheet and is housed in a hard, protective case.
28335	ProCheck-S low NTU value (typically less than 1 NTU) - for MicroTOL, Micro100/1000 - includes one ProCheck-S standard, log sheet, microfiber cloth, instruction sheet and is housed in a hard, protective case.
19554	MicroTSCM 4 Streaming Current Monitor, includes MicroTSCM analyzer and sensor, 25 feet of interconnect cable, graphical display, 4-20 mA / 0-10 VDC analog outputs, user-programmable offset, high and low gain switch, on-screen instructions, three separate alarm contacts and calibration kit, built in PI controller for automatic control of coagulant dosing plus RS-485.
19553	MicroTSCM 3 Streaming Current Monitor, includes MicroTSCM analyzer and sensor, 25 feet of interconnect cable, graphical display, 4-20 mA / 0-10 VDC analog outputs, user-programmable offset, high and low gain switch, on-screen instructions, three separate alarm contacts and calibration kit, built in PI controller for automatic control of coagulant dosing plus RS-232.
19550	MicroTSCM 2 Streaming Current Monitor, includes MicroTSCM analyzer and sensor, 25 feet of interconnect cable, graphical display, 4-20 mA / 0-10 VDC analog outputs, user-programmable offset, high and low gain switch, on-screen instructions, three separate alarm contacts and calibration kit plus built in PI controller for automatic control of coagulant dosing.
19549	MicroTSCM 1 Streaming Current Monitor, includes MicroTSCM analyzer and sensor, 25 feet of interconnect cable, graphical display, 4-20 mA / 0-10 VDC analog outputs, user-programmable offset, high and low gain switch, on-screen instructions, three separate alarm contacts and calibration kit.
19571C	AccUView Wastewater Online UV%T Analyzer with heater, 100-240 VAC, each unit includes stainless steel (304) enclosure with window for viewing of analyzer, spare cuvette, spare flow through assembly, heater, 4-20mA with isolator, backlight display, bellows pump, power supply, desiccant, 500ml of 100%T water and 50 feet of source drain tubing.
19571	AccUView Wastewater Online UV%T Analyzer, 100-240 VAC, each unit includes stainless steel (304) enclosure with window for viewing of analyzer, spare cuvette, spare flow through assembly, 4-20mA with isolator, backlight display, bellows pump, power supply, desiccant, 500ml of 100%T water and 50 feet of source drain tubing.
19574	UVT-15 UV Photometer 240 volt, includes operating instruction decal, quartz cuvette and plug in power supply.
19573	UVT-15 UV Photometer 120 volt, includes operating instruction decal, quartz cuvette and plug in power supply.
515600	pH 10 buffer tablets (100/box)
515620	pH 7 buffer tablets (100/box)
515620	pH 4 buffer tablets (100/box)
10002	Buffer solution, pH 7.00 (500ml)
10005	Buffer solution, pH 7.00 (1 gallon)
10001	Buffer solution, pH 4.00 (500ml)
10004	Buffer solution, pH 4.00 (1 gallon)
10003	Buffer solution, pH 10.00 (500ml)
10006	Buffer solution, pH 10.00 (1 gallon)
10124A	Acetate buffer (pH4) for residual analyzers (case - 4 x 1 gallon)
09941	Micro Check total, detection levels ppm High range 0.0, 0.1, 0.2, 0.5, 0.8, 4.0, 10.0 Low range 0.0, 0.05, 0.1, 0.15, 0.2, 0.5, 1.0
09940	Micro Check free, detection levels ppm (0, 0.1, 0.2, 0.4, 0.6, 0.8, 1.2, 1.5, 2.0, 2.6, 4.0, 6.0, 10)
10316	DPD Reagent Powder Pops, total chlorine, 25ml, pkg of 1000
10315	DPD Reagent Powder Pops, total chlorine, 25ml, pkg of 200
10313	DPD Reagent Powder Pops, free chlorine, 25ml, pkg of 1000
10312	DPD Reagent Powder Pops, free chlorine, 25ml, pkg of 200
10310	DPD Reagent Powder Pops, total chlorine, 10ml, pkg of 1000
10309	DPD Reagent Powder Pops, total chlorine, 10ml, pkg of 200
10307	DPD Reagent Powder Pops, free chlorine, 10ml, pkg of 1000
10306	DPD Reagent Powder Pops, free chlorine, 10ml, pkg of 200
10304	DPD Reagent Powder Pops, total chlorine, 5ml, pkg of 1000
10303	DPD Reagent Powder Pops, total chlorine, 5ml, pkg of 200
10301	DPD Reagent Powder Pops, free chlorine, 5ml, pkg of 1000
10300	DPD Reagent Powder Pops, free chlorine, 5ml, pkg of 200
10520	DPD reagent dispenser for total chlorine - 1000 tests, 25ml sample size for Hach® photometers
10518	DPD reagent dispenser for total chlorine - 100 tests, 25ml sample size for Hach® photometers
10519	DPD reagent dispenser for free chlorine - 1000 tests (5x200), 25ml sample size for Hach® photometers
10517	DPD reagent dispenser for free chlorine - 100 tests, 25ml sample size for Hach® photometers
10507T	DPD reagent dispenser for total chlorine - 1000 tests (5x200) (for test kits using tablet technology), 10ml sample size for Lamotte, Orbeco/Hellige, YSI, Palintest, Tintometer and Orion photometers
10444A	DPD reagent dispenser for total chlorine - 400 tests (2x200) (for test kits using tablet technology), 10ml sample size for Lamotte, Orbeco/Hellige, YSI, Palintest, Tintometer and Orion photometers
10506T	DPD reagent dispenser for total chlorine - 100 tests (for test kits using tablet technology), 10ml sample size for Lamotte, Orbeco/Hellige, YSI, Palintest, Tintometer and Orion photometers
10505T	DPD reagent dispenser for free chlorine - 1000 tests (5x200) (for test kits using tablet technology), 10ml sample size for Lamotte, Orbeco/Hellige, YSI, Palintest, Tintometer and Orion photometers
10439A	DPD reagent dispenser for free chlorine - 400 tests (2x200) (for test kits using tablet technology), 10ml sample size for Lamotte, Orbeco/Hellige, YSI, Palintest, Tintometer and Orion photometers
10504T	DPD reagent dispenser for free chlorine - 100 tests (for test kits using tablet technology), 10ml sample size for Lamotte, Orbeco/Hellige, YSI, Palintest, Tintometer and Orion photometers
10506C	DPD reagent dispenser for total chlorine - 1000 tests (5x200), 10ml sample size for Hach® and Hanna photometers
10448A	DPD reagent dispenser for total chlorine - 400 tests (2x200), 10ml sample size for Hach and Hanna photometers
10506	DPD reagent dispenser for total chlorine - 100 tests, 10ml sample size for Hach® and Hanna photometers
10504C	DPD reagent dispenser for free chlorine - 1000 tests (5x200), 10ml sample size for Hach® and Hanna photometers
10447A	DPD reagent dispenser for free chlorine - 400 tests (2x200), 10ml sample size for Hach® and Hanna photometers
10504	DPD reagent dispenser for free chlorine - 100 tests, 10ml sample size for Hach® and Hanna photometers
10502C	DPD reagent dispenser for total chlorine - 1000 tests (5x200), 5ml sample size for HF scientific and Hach® photometers
10446A	DPD reagent dispenser for total chlorine - 400 tests (2x200), 5ml sample size for HF scientific and Hach® photometers
10502	DPD reagent dispenser for total chlorine - 100 tests, 5ml sample size for HF scientific and Hach® photometers
10500C	DPD reagent dispenser for free chlorine - 1000 tests (5x200), 5ml sample size for HF scientific and Hach® photometers
10445A	DPD reagent dispenser for free chlorine - 400 tests (2x200), 5ml sample size for HF scientific and Hach® photometers
10500	DPD reagent dispenser for free chlorine - 100 tests, 5ml sample size for HF scientific and Hach® photometers
52580	ProCal turbidity standard for the Hach® 2100Q portable turbidimeter (800 NTU) 500ml bottle
52570	ProCal turbidity standard for the Hach® 2100Q portable turbidimeter (800 NTU) 250ml bottle
52560	ProCal turbidity standard for the Hach® 2100Q portable turbidimeter (100 NTU) 500ml bottle
52550	ProCal turbidity standard for the Hach® 2100Q portable turbidimeter (100 NTU) 250ml bottle
52540	ProCal turbidity standard for the Hach® 2100Q portable turbidimeter (20 NTU) 500ml bottle
52530	ProCal turbidity standard for the Hach® 2100Q portable turbidimeter (20 NTU) 250ml bottle
52520	ProCal turbidity standard for the Hach® 2100Q portable turbidimeter (0.0 NTU) 500ml bottle
52510	ProCal turbidity standard for the Hach® 2100Q portable turbidimeter (0.0 NTU) 250ml bottle
52500	ProCal turbidity standard for the Hach® 2100Q portable turbidimeter (kit: 0.0, 20, 100, 800 NTU) 500ml bottle
52490	ProCal turbidity standard for the Hach® 2100Q portable turbidimeter (kit: 0.0, 20, 100, 800 NTU) 250ml bottle
52480	ProCal turbidity standard for the Hach® 2100P portable turbidimeter (800 NTU) 500ml bottle
52470	ProCal turbidity standard for the Hach® 2100P portable turbidimeter (800 NTU) 250ml bottle
52460	ProCal turbidity standard for the Hach® 2100P portable turbidimeter (100 NTU) 500ml bottle
52450	ProCal turbidity standard for the Hach® 2100P portable turbidimeter (100 NTU) 250ml bottle
52440	ProCal turbidity standard for the Hach® 2100P portable turbidimeter (20 NTU) 500ml bottle
52430	ProCal turbidity standard for the Hach® 2100P portable turbidimeter (20 NTU) 250ml bottle
52420	ProCal turbidity standard for the Hach® 2100P portable turbidimeter (0.0 NTU) 500ml bottle
52410	ProCal turbidity standard for the Hach® 2100P portable turbidimeter (0.0 NTU) 250ml bottle
52400	ProCal turbidity standard for the Hach® 2100P portable turbidimeter (kit: 0.0, 20, 100, 800 NTU) 500ml bottle
52390	ProCal turbidity standard for the Hach® 2100P portable turbidimeter (kit: 0.0, 20, 100, 800 NTU) 250ml bottle
52290	ProCal turbidity standard for the Hach® 2100AN turbidimeter (0.0 NTU) 500ml bottle
52380	ProCal turbidity standard for the Hach® 2100AN turbidimeter (7500 NTU) 30ml sealed bottle
52370	ProCal turbidity standard for the Hach® 2100AN turbidimeter (4000 NTU) 500ml bottle
52360	ProCal turbidity standard for the Hach® 2100AN turbidimeter (4000 NTU) 250ml bottle
52350	ProCal turbidity standard for the Hach® 2100AN turbidimeter (1000 NTU) 500ml bottle
52340	ProCal turbidity standard for the Hach® 2100AN turbidimeter (1000 NTU) 250ml bottle
52330	ProCal turbidity standard for the Hach® 2100AN turbidimeter (200 NTU) 500ml bottle
52320	ProCal turbidity standard for the Hach® 2100AN turbidimeter (200 NTU) 250ml bottle
52310	ProCal turbidity standard for the Hach® 2100AN turbidimeter (20 NTU) 500ml bottle
52300	ProCal turbidity standard for the Hach® 2100AN turbidimeter (20 NTU) 250ml bottle
52280	ProCal turbidity standard for the Hach® 2100AN turbidimeter (0.0 NTU) 250ml bottle

Catalog #	Description
PH31C1A2	pH sensor head - PEEK, Face seal for flow Use with the AdvantEDGE LD500 Analyzer or the AquaSelect Multi-Input Analyzer
PH21A1A2	pH sensor head - CPVC, Protec Electrode Use with the AdvantEDGE LD500 Analyzer or the AquaSelect Multi-Input Analyzer
ORPSOL600	ORP calibration solution - 600mV, 500mL
ORPSOL200	ORP calibration solution - 200mV, 500mL
ORP31A1A2	ORP sensor head - CPVC, Protec Electrode Use with the AdvantEDGE LD500 Analyzer or the AquaSelect Multi-Input Analyzer
OPDO22D3	Optical RDO Sensor Assembly For direct 4-20 mA or ModBus output
OPDO21D3	Optical RDO Sensor Assembly Use with the AdvantEDGE LD500 Analyzer or the AquaSelect Multi-Input Analyzer
CC31A	Conductivity sensor head - PEEK, 0.1 Cell Constant Use with the AdvantEDGE LD500 Analyzer or the AquaSelect Multi-Input Analyzer
CC21B	Conductivity sensor head - CPVC, 1.0 Cell Constant Use with the AdvantEDGE LD500 Analyzer or the AquaSelect Multi-Input Analyzer
CC21A	Conductivity sensor head - CPVC, 0.1 Cell Constant Use with the AdvantEDGE LD500 Analyzer or the AquaSelect Multi-Input Analyzer
39950	ProCal Primary Calibration Kit - 0.02, 1.0 and 10 NTU (for MicroTOL 5 and 6)
SC31B1A10	Dissolved Ozone Analog Sensor for use with AquaSelect Analyzer
ST210C	Toroidal Conductivity Analog Sensor 3/4 inch NPT for use with AquaSelect Analyzer
SC21B110	Contacting Conductivity Analog Sensor, 1 inch, for use with AquaSelect Analyzer
SR21A9E10	ORP Analog Sensor 1 inch for use with AquaSelect Analyzer
FP21A9E10	ph Analog Sensor 1.5 inch for use with AquaSelect Analyzer
AP08DS	Scaling card for analog AdvantEDGE Digital sensors for AquaSelect analyzer
AP07RDO	Scaling card for analog AdvantEDGE RDO sensor for AquaSelect analyzer
AP06OZ	Scaling card for analog Dissolved Ozone sensor for AquaSelect analyzer
AP04TR	Scaling card for analog Toroidal Conductivity sensor for AquaSelect analyzer
AP03CC	Scaling card for analog Contacting Conductivity sensor for the AquaSelect analyzer
AP02ORP	Scaling card for analog ORP sensor for the AquaSelect analyzer
AP01PH	Scaling card for analog pH sensor for the AquaSelect analyzer
50009	Light shield (not treaded for use with 28 x x93 mm cuvettes)
50096	Lamp source with leads 2/pk
70820	Lamp alignment tool
20955	Fuse 1/2 amp, FA 5 x 20 mm
20973	Fuse 1 amp, FA 5 x 20 mm
39887	ProCal calibration set (0.02, 8, and 800 NTU)
50027	Operator's manual for DRT100B - free download from our web site
28040	Replacement tubing/cuvette kit (CLX-XT)
22047	Pump tubing kit
22041	Pump head kit
22974	Cuvette - Quartz
22965	Cleaning kit (includes modified cap, tubing and connectors)
21541	Lamp module, plug in source lamp
21546	Cable - interconnect cable between sensor and analyzer (6 feet)
21640	Operator's manual for Micro200BW 0-1000 NTU (free download from web site)
21652	Operator's manual for Micro200BW 0-10 and 0-100 NTU (free download from web site)
39823	ProCal Primary calibration standard - 40.0 NTU
39826	ProCal Primary calibration standard - 4.0 NTU
39828	ProCal Primary calibration set (0.02, 4.0, and 10.0 NTU)
39820	ProCal Primary calibration set (0.02, 4.0, 10.0, 40.0, and 100 NTU)
39830	ProCal Primary calibration set (0.02, 100, 400, and 1000 NTU)
70718	Accessory kit (includes 1 each 0.02 NTU secondary standard, flow control clamp (stainless steel), spare cuvette and light shield cap)
MH1132	Wash hardware for AdvantEDGE sensors - attach air/water purge block to sensor body. Works with compressor and LD500 wash relay or PLC.
MH1261	2" Tri-clamp adapter - includes Tee adapter, gasket and clamp - stainless steel
MH1222-RD	Wash hardware for AdvantEDGE Optical DO sensor - attach air/water purge block to sensor body. Works with compressor and LD500 wash relay or PLC.
MHFB02	Ball float platform - PVC float platform fo up to 4 AdvantEDGE stytems
FC003	Flow chamber assembly - dual flow chamber with mounting plate with fittings.
FC002	Flow chamber assembly - flow chamber with mounting plate with kynar fittings.
MH1121	1.5" ball valve - high pressure, stainless steel
MH1122	1.5" ball valve - high pressure, CPVC
MH1111	1.5" ball valve - low pressure, stainless steel
MH1112	1.5" ball valve - low pressure, CPVC
MH1252	Immersion assembly with swivel and ball float - 7 foot extension with junction box - 1" sensors with swivel hand rail mount and inflatable float
MH1242	Immersion assembly with swivel rail mounting - 7 foot extension with junction box - 1" sensors with swivel hand rail mount
MH3083-RO	Immersion assembly for AdvantEDGE - 7 foot PVC extension with junction box - for Optical DO sensors
MH3083	Immersion assembly for AdvantEDGE - 7 foot PVC extension with junction box - 1" sensors
MH3022	1.5" Tee for AdvantEDGE - schedule 80, CPVC
MH3011	1.5" Tee for AdvantEDGE - stainless steel
MH1042	1.5" union mount assembly for AdvantEDGE - CPVC
MH1041	1.5" union mount assembly for AdvantEDGE - stainless steel
MH1042-RT	1.5" union mount for AdvantEDGE Turbidity sensor - CPVC
MH1041-RT	1.5" union mount for AdvantEDGE Turbidity sensor - stainless steel
CGRIP01	Cord grips - 1/2 inch cord grips for conduit boxes (qty 50)
SUN01	Sun shield - to protect display from full sunlight
PS24	AC/DC power supply - external 100-240 VAC input to 24 VDC output
PIP2KIT	Pipe mount - hardware to mount onto a 2" pipe
DIN2KIT	1/2 DIN panel mount - hardware for mounting in a LD500 in a 5.25" cutout
DIN4KIT	1/4 DIN panel mount - hardware for mounting in a LD500 in a 3.5" cutout
DMR04-Z	Membrane cap face seal - flat cap for o-ring with pre-stretched membrane
DMR08-Z	Membrane cap flat - process flat for ozone
RDOK2	Ozone electrolyte in the ppm range - 60ml bottle
OPCALKIT	Calibration kit - includes calibration and storage chamber, calibration cap, storage cap and sodium sulfite.
OPNOSEKIT	Nose cone replacement kit - includes nose, grease, lint free cloth and pre-installed o-ring.
OPORKIT	O-ring replacement kit - includes o-ring for sensor body, internal nose cone o-ring, sensor cap o-rings.
DMROP03	Sensor cap replacement kit - must be replaced annually. Includes sensor cap, o-rings, grease and lint free cloth.
DRM03M	Protected cap with pre-stitched membrane and mask
DMR03	Protected cap with pre-stitched membrane
RDOK1	Dissolved oxygen electrolyte in ppm range - 60ml bottle
SOL2C	Conductivity electrode sensor cleaning solution - 500ml bottle
SOL5000	5000 µS/cm conductivity calibration solution - 500ml bottle
SOL2000	2000 µS/cm conductivity calibration solution - 500ml bottle
SOL1000	1000 µS/cm conductivity calibration solution - 500ml bottle
CL31B1	Chlorine sensor for AdvantEDGE Chlorine measurement system and Chlorine panel
MH1222	Wash hardware for turbidity - attach air/water purge block to sensor body. Works with compressor and LD500 wash relay or PLC.
FOR40	40 NTU Formazin calibration kit (injector and 500ml mix bottle)
FOR4K	4000 NTU Formazin stock solution - 500ml bottle
DMR09	Membrane assembly - chlorine membrane cap with pre-stretched membrane
RDOK9	Chlorine electrolyte - 60ml bottle
RCS04	ORP storage solution 60ml bottle - for storage caps to keep glass electrode wet
ORPSOL600	600mV solution - ORP calibration solution - 500ml bottle
ORPSOL200	200mV solution - ORP calibration solution - 500ml bottle
SBC01	Storage cover - comes with sponge to keep stored sensor electrodes wet
SBS04-10	Salt bridge - CPVC process flat - for all pH and ORP sensors with CPVC bodies. Quantity 10
SBS04-3	Salt bridge - CPVC process flat - for all pH and ORP sensors with CPVC bodies. Quantity 3
SBS04-1	Salt bridge - CPVC process flat - for all pH and ORP sensors with CPVC bodies. Quantity 1
SBS03-10	Salt bridge - CPVC protected - for all pH and ORP sensors with CPVC bodies. Quantity 10
SBS03-3	Salt bridge - CPVC protected - for all pH and ORP sensors with CPVC bodies. Quantity 3

美國HF濁度校準液套裝HF39957/39953

Accessories

留言框

產品：

您的單位：

您的姓名：

聯(lián)系電話：

常用郵箱：

省份：

詳細地址：

補充說明：

驗證碼：